Safety - Page 11 of 13 - IRP Fire & Safety

Showing 151–165 of 181 results

5K Mega Swivel Anchorage Connector, Zinc-Plated for Steel. ANSI Z359.1-2007

Quick View
D-Bolt Fall Arrest Permanent Anchorage Connector

Quick View
D-Plate Fall Arrest Permanent Anchorage Connector
Length: 6.142″ (156.000 mm)

Width: 3.740″ (95.000 mm)

Height: 1.220″ (31.000 mm)

Weight: 1.089lb (0.494 kg)

Approvals: ANSI Z359.1-2007
Quick View
Vertical Beam Adjustable Anchor Point

Designed for use on both vertical and horizontal I-Beams to create a fixed anchor point. The Vertical Beam Anchor can be fixed at any height to support reduced free fall and lower fall clearance requirements. Beam flange width 4″-14″ with a minimum flange thickness of 0.25″. Breaking strength: 5,000 lbf/22 kN. Maximum personnel working load 310 lbs./454 kg. Compliance: ANSI Z359.18

Quick View
V-EDGE, Leading Edge Cable SRL, 8′ (2.4m) Twin Leg, Large Snaphook

Simplify product selection with the V-EDGE Personal Fall Limiter. The V-EDGE is engineered for use in overhead and foot-level tie off points, and where leading edge hazards are a concern. With a stainless steel housing built to last in the toughest environments, this PFL can help save time and money on costly replacements.

Quick View
V-Form+, STD, Back & Chest D-Rings, Quick-Connect Leg Straps

Harness, V-Form+, STD, Full Body, Back & Chest D-Rings, Quick-Connect Leg Straps, Patent-Pending RaceFORM™ Buckle, ANSI Z359.11/CSA Z259.10/OSHA. MSA P/N 10206109

+
Quick View
Earmuffs, V-Gard Cap Mounted, Red Colour Coding – ANSI/CSA. MSA P/N 10190358

Earmuffs, V-Gard Cap Mounted, Red Colour Coding – High Attenuation Level, Improved Sealing Ring, Foam-Injected Ear Pads, NRR Rating – 12, SNR Rating – 36, ANSI/CSA. MSA P/N 10190358

Quick View
Gloves, Chrome Series 4028, XL HexArmor Part# 4028-10

Gloves, Chrome Series 4028, XL HexArmor Chrome Series 4028 Glove (XL) Red Slip Fit – SuperFabric® Material Palm, PVC-Printed Synthetic Leather Palm, Superior Back-of-Hand Impact Protection, Double-Stitched Core-Spun Thread Interior Seams, SlipFit® Cuffs, Machine Washable. Abrasion (4) Cut (5) Tear (2) Puncture (1) Part# 4028-10

Quick View
MSA V-Gard Matte Hard Cap

Quick View
Squids 3157 Coiled Helmet Lanyard
MEETS ANSI/ISEA 121-2018 – Third-party certified to 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor

EASILY TETHER ANY HARD HAT – Connects to hard hat accessory slot or suspension to prevent drops

DOUBLE-LOCK BUCKLE – Securely clips around captive connection points on fall protection harnesses, safety vests, tool belts, d-rings, etc.

LOW-PROFILE COIL LANYARD – Reduces snag or tangle hazards

VERSATILE – Can also be used to tether hand tools or other gear weighing 2lbs or less

LANYARD DIMENSIONS – 12–48in // 30–122cm
Quick View
Squids 3158 Coiled Hard Hat Lanyard
EASILY TETHER ANY HARD HAT – Connects to hard hat accessory slot or suspension to prevent drops

QUICK-RELEASE CLAMP – Securely clips to shirts or collars

LOW-PROFILE COIL LANYARD – Reduces snag or tangle hazards

VERSATILE – Can also be used to tether hand tools or other gear weighing 2lbs or less

LANYARD DIMENSIONS – 12–48in // 30–122cm
Quick View
Arsenal 5550 3-inch Padded Base Layer Tool Belt
1680D ballistic polyester

Thick, vented foam padding for comfort

Nickel-plated 2in double tongue metal roller buckle

Nickel-plated grommets set firmly for durability

Nickel-plated suspender anchors
Quick View
Arsenal 5562 Hammer Holster
Approved to the ANSI/ISEA 121-2018 standard

1680D ballistic polyester is abrasion resistant

Holds most styles and sizes of hammers

Two exterior D-rings for tool lanyard attachment

Open rubber dipped iron hammer holder allows for easy holstering of hammers with tool lanyards on them

Modular buckle connection system on back for easy attachment and removal to fall protection harnesses and tool belts

Reflective strip for safety and visibility

Maximum safe working capacity: 3lbs // 1.4kg

Third-party certified to a 2:1 (dynamic) and 5:1 (static) safety factor

6in L x 3in W x 8in H // 15cm x 8cm x 20cm
Quick View
Squids 3100F(x) Tool Lanyard
Approved to the ANSI/ISEA 121-2018 standard

Shock absorbing properties reduce the dynamic force on the body or other anchor point if drop occurs

Durable 1680 denier polyester elastic blended webbing extends from 38-48in (96-122cm)

Lightweight design reduces snag hazards and added weight

Anodized aluminum alloy carabiner with captive eye

Treaded loop end that grips the tool when attached

High strength 3-ply nylon stitching secures connecting ends

Single length construction eliminates weak points seen with multi-component lanyards

Third party certified to a 10lbs (4.5kg) maximum capacity with 2:1 safety factor
Quick View
Squids 3770 Tape Measure Holder
TESTED & APPROVED – ANSI/ISEA 121-2018 compliant

DURABILITY – 1200D and 600D polyester main material for long life & durability

EASY TO USE – Hook and loop straps secure tape measure inside trap for safe and easy tethering

TETHER RING – Includes strong zinc-plated cast alloy D-Ring for tethering to tool lanyards

BELT CLIP – Stainless steel belt clip securely attaches to a tool belt

MAX LOAD – Maximum safe working capacity of 2lb / 0.9kg

LARGE (ORANGE) – Fits tape measures from 16ft – 25ft // 5m – 8m

X-LARGE (BLACK) – Fits tape measures from 30ft – 40ft // 9m – 12m

TOOL TETHERING KITS AVAILABLE – Squids 3190 Kit (includes 3130S Coil Lanyard and 3770L Tape Measure Holder) and Squids 3193 (includes 3100F(x) Tool Lanyards and 3770L Tape Measure Holder)
Quick View