Fixed - IRP Fire & Safety

Showing all 7 results

Fire Pump, Elect. Darley Starterpaq-ES3 Series (NFPA 13D) 30GPM @ 50PSI, 3HP, Horizontal

Pump, Fixed Electric STN (KIT), Darley Starterpaq-ES3 Series 30GPM @ 50PSI, 3HP, Horizontal, 230V-1PH-60Hz, Cast Iron Pump Housing, SS Impeller, Darley Motor, 2″ NPT Inlet Connection, c/w Galvanized Steel 2″ Discharge Manifold c/w Pressure switch, Pressure Gauge, Groove Coupling, Check Valve and Test Port Ball Valve, Control Panel Nema 2, Rated 7.5HP, 230-V-1PH-60Hz, Wall Mounted. Panel Lights: Fail to Start & Power. On/Off Control Switch, Skid with Panel Mount Pre-wired and Tested.

Quick View
Fire Pump, 24 HP Darley Diesel Portable Fire, Kubota, Gear Driven, High Pressure...

Pump, Fire, Kubota, Gear Driven, 24 HP, High Pressure Low Volume, Engine Mounted, 3 Cylinder, 4 Cycle, Liquid Cooled, 12 Volt Starter, 40 Amp Alternator, Fuel and Oil Pump and Filters. Hard Anodized Aluminum Alloy Casing and Discharge Valve, Sulfuric Anodized Aluminum Alloy Gear Case, And Plated Engine Adapter, Bronze Impeller and Wear Rings. Stainless Steel Impeller Shaft, Mechanical Seal, Heat Treated Alloy Steel Helical Gears, Ball Bearing Construction, Built-In Discharge Check Valve, Engine Control Panel, Adjustable Discharge Valve, Adjustable Throttle, 2-1/2″ NPT Suction, 2 – 1-1/2″ NPT and 1 – 2-1/2″ NPT Discharge. KE00702 Diesel Fuel Tank, Hose and Adapter, 6 Gal. Steel, AC00169 Single Electric Throttle, 2603035 Discharge Pressure Gauge, AN00902 Assy – Loss of Water Protection. P/N 2.5AGE 24K 2018

Quick View
Talco HDR-100

Heavy Duty Residential Package
Design Condition: 100GPM @ 83PSI

System Specifications:

Motor
-10 Horsepower Electric
-230 Volt
-46 Amp
-Single Phase
-3450 RPM

Quick View
Talco LSF-5OOCIF

NFPA-13D Residential Package
Maximum Suction Pressure: 72PSI
System Specifications Motor
-5 horsepower electric
-240 Volt, 21.5 Amp
-Single Phase

Quick View
Talco LSF-300C

NFPA-13D Residential Package
Maximum Suction Pressure: 63PSI

System Specifications
Motor
-3 Horsepower Electric
-240 Volt, 13 Amp
-Single Phase
-3450

Quick View
Talco ULR

TALCO ULR models are fully NFPA 20 & NFPA 13R compliant. Flow rates range from 50 to 1500 GPM with pressures up to 160 PSI. System options include test headers, flow loops, city bypass loops, jockey pumps, an array of controllers, and much, much more. All components are listed, and suction & discharge fittings and piping sections are powder coated for long service life. ULR systems are frame-mounted, wired, and pressure tested before they leave our shop to ensure ease of installation and reliable operation right off the truck. All an installing contractor has to worry about are connecting the suction & discharge and supplying the controllers with proper power. Let us take the hassle out of your next project, TALCO has you covered.

Quick View
Talco ULV

Talco’s 13-ULV packages were designed for installations with single-phase power. These systems, which have officially certified vertical line fire pumps and limited service fire pump controllers, were specifically designed for 13R applications such as residential/commercial mixed-use buildings, small apartment complexes and assisted living centers. All 13-ULV models are available with optional jockey pumps.

13-ULV-R packages use commercial controllers with official limited service certification. These systems are built in such a way that they fully comply with the NFPA13R standard.

Quick View