Services
View our Services offered below
IRP Fire & Safety comprises a dedicated team of professionals responsible for the design, supply and commissioning of products that are not standard inventory items but are dedicated to the relevant industry. We work with our suppliers around the world and with our in-house team of specialists to recommend the right product and service mix to give the best solution to our clients’ challenges. These are specially ordered for every customer’s requirements, and we take pride in the solutions that we offer.
Click to view our Technical Services Catalogue
Hydrostatic Testing of Fire Extinguishers
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System
- Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
- Hose Inspected in accordance with NFPA 10 2013 subsection 7.6
Inspection and Recertification of Fire Extinguishers
- Shall be done in accordance with NFPA 10 Chapter 7 in conjunction with the OEM Manual to meet industrial standards
- Extinguishers are inspected to ensure it is free of defects and are fit for service
- All extinguishers are properly labelled and tagged, marking the inspection date and the next recertification date
- On Site or at our Facility
Service & Recharge of Fire Extinguishers
- Shall be done in accordance with NFPA 10 2013 Standards Chapter 7 and shall be carried out only by trained and competent personnel utilizing OEM service parts
- Technicians are trained with over twenty-five (25) years service experience
- Quick, turn around for repairs and recharging of extinguishers
Hydrostatic Testing of Suppression Cylinder
- All Suppression cylinders are low pressure tested to meet DOT requirements and Guidelines by NFPA 17A Standard for Wet Chemical Extinguishing Systems
- IRP technicians are Hazmat trained to re-qualify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
Recharge of Suppression Cylinder
- Refilling and Recertification of cylinders shall be done in accordance with OEM recommendations & NFPA 17A Standard for Wet Chemical Extinguishing Systems
- All cylinders are cleaned and inspected internally for defects prior to refilling
- All cylinders are properly labelled and tagged, marking the inspection date and the next recertification date
Inspection and Recertification of Kitchen Suppression Cylinder
- Inspection of cylinders shall be done in accordance with OEM recommendations & NFPA 17A Standard for Wet Chemical Extinguishing Systems
- All cylinders are cleaned during inspection to be free of grease and grime
- Recommended at least every 6 months
Degreasing Kitchen Suppression System Hood
- Inspection of cylinders shall be done in accordance with OEM recommendations & NFPA 17A Standard for Wet Chemical Extinguishing Systems
- All cylinders are cleaned during inspection to be free of grease and grime
- Recommended at least every 6 months
Inspection & Recertification of Clean Agent Suppression Systems
- Fire Suppression Systems are serviced and tested in accordance with NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems
Refill of Clean Agent Suppression Cylinders
- Refilling and Recertification of cylinders shall be done in accordance with OEM recommendations & NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems.
Hyrdostatic Testing of Clean Agent Suppression Cylinders
- All Suppression cylinders are low pressure tested to meet DOT requirements and Guidelines by NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems
- IRP technicians are Hazmat trained to re-qualify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
TRIMAX Compressed Air Foam (CAF) Systems
- Commissioning will include inspection, preparation for testing and 10 second discharge. Refilling of system after testing is included (Less consumables)
- It shall be done as per OEM recommendations as well as NFPA 10 2013, NFPA 25 and NFPA 1962
- Inspection of Trimax is done as per OEM recomendations as well as NFPA 10 2013, NFPA 25 and NFPA 1962
- Recommended Annually
Recertification of Components
- Recertification in accordance with OEM recommendations, NFPA 25, ASTM A515/515M 17 Standard as well as OSH Act.
Inspection & Recertification of Foam Carts
- It shall be done as per OEM recomendations as well as NFPA 10 2013, NFPA 25 and NFPA 1962
Installation of Fire Hose Reels
- Fire hoses shall be installed following the guidelines as per NFPA 1962 Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances, and BS-en-617 standards
Service & Repair Fire Hose
- Fire hoses shall be repaired using OEM guidelines along with NFPA 1962 Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances
Pressure Testing of Fire Hose
- Pressure testing of fire hoses shall be carried out in accordance with NFPA 1962 Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances by a trained Service Technician
- Pressure testing is done using certified hose testing equipment
- Each hose test is graphically recorded for the duration of the test
- Onsite or at our facility
Inspection of Building System Hose Reels
- Inspection of Building System Hose Reels in accordance with EN 671-3:2009 (E)
- Inspection of Industrial Systems Hose Reels in accordance with NFPA requirements
Inspection & Recertification
- Inspection of Fire Pumps should be done in accordance with NFPA 25 Chapter 8
- For on-site services, there is a charge for Pump Testing Equipment.
- Testing Misc. consumables are also an adder.
Inspection & Recertification of MSA SCBA and Airline Respirators
- Service includes the Annual Flow Test recommended by the Manufacturer and in accordance with NFPA 1852 Standard, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)
Inspection & Recertification of MSA SCBA and Airline Respirators
- Service includes the Annual Flow Test recommended by the Manufacturer and in accordance with NFPA 1852 Standard, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)
Inspection & Recertification of MSA SCBA and Airline Respirators
- Sanitisation entails cleaning with MSA germicidal wipes.
- Additional Cleaning available using an Ultrasonic Bath
Hydrostatic Testing of SCBA Breathing Air Cylinders.
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System. Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
Hydrostatic Testing of SCBA Breathing Air Cylinders.
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System. Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
Hydrostatic Testing of SCBA Breathing Air Cylinders.
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System. Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
Hydrostatic Testing of SCBA Breathing Air Cylinders.
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System. Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
Hydrostatic Testing of SCBA Breathing Air Cylinders.
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System. Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
Service & Calibration of Portable Gas Detection Instruments
- Calibration of Portable Gas Detection Instruments by Manufactured certified Technicians
- Instruments are calibrated in accordance with Manufacture specifications and recommendations outlined by both International Safety Equipment Association (ISEA) and Occupational Safety and Health Administration (OSHA).
Sanitization of Portable Gas Detection Instruments
- Instruments are cleaned in accordance to manufacture guidance to prevent, control, and manage contact with the Coronavirus (COVID-19)
Preventative Maintainance of Fixed Gas Detection Systems
- Service & Calibration by Certified Manufacturers Technicians
- Recommended Quarterly
Preventative Maintainance of Fixed Flame Detection Systems
- Preventative Maintainance of Fixed Flame Detection Systems
- Cost of Service and Testing depends on the quantity of detectors in the system.
- Instruments are serviced and tested in accordance with manufacturing specifications.
Preventative Maintainance of Fire Detection & Suppression Systems
- Fire Alarms Systems are serviced and tested in accordance with NFPA 70 & NPFA 72
- Fire Detection and Suppression are serviced and tested in accordance with NFPA 2001
Inspection Testing of Emergency Lighting / Exit Lighting
Inspection of Fall Protection Equipment
- Fall Arrest equipment in inspected to ANSI Z359.2-2007 General Industry Best Practice Standard Minimum Requirements for a Comprehensive Managed Fall Protection Program & MSA Competent Person Fall Protection Equipment Inspection Manual, 2014
- Tripod systems are inspected as per ANSI Z359.14-2012 Safety Requirements for Self-Retracting Devices for personal fall Arrest and Rescue Systems
Preventative Maintainance of Fixed Gas Detection Systems
- Service & Calibration by Certified Manufacturers Technicians
- Recommended Quarterly
Preventative Maintainance of Fixed Flame Detection Systems
- Preventative Maintainance of Fixed Flame Detection Systems
- Cost of Service and Testing depends on the quantity of detectors in the system.
- Instruments are serviced and tested in accordance with manufacturing specifications.
Preventative Maintainance of Fire Detection & Suppression Systems
- Fire Alarms Systems are serviced and tested in accordance with NFPA 70 & NPFA 72
- Fire Detection and Suppression are serviced and tested in accordance with NFPA 2001
Inspection Testing of Emergency Lighting / Exit Lighting
Preventative Maintainance of Fixed Gas Detection Systems
IRP’s TAR services offer a range of packaged solutions to meet the needs of your turnaround. Our onsite management of the equipment supported by our experience ensures every device is fit for use each day. 
The onsite TAR team conducts relevant inspections, testing and repairs prior to equipment being issued for use, ensuring the TAR fleet of equipment is not reduced during this crucial period. Our equipment management service would complement the overall objective of the TAR, providing quality work, reducing cost, and saving you time so you can focus on other critical operations during this time.
Each package can be tailored by selection to fit every stage of your operation during the Turnaround. Bundles can be assembled comprising equipment from each package, all managed and controlled by IRP’s TAR onsite team to maximise your time, minimise your cost and provide efficiency to progress your jobs.
INSTRUMENTS PACKAGE
- The Gas detection instruments offered are the standard four (4) Gas diffusion, four (4) Gas Pumped and the four (4) Gas Area monitoring devices. Option 1 – Altair 4XR DiffusionOption 2 – Altair 5X PumpOption 3 – Altair io360 Area Monitor* Each instrument will be bump tested prior to going out on each shift* All equipment is inspected and sanitised after each shift and is prepped for the incoming shift* Site training is conducted and recorded with the end user before the start of turnaround (Upon client’s request)
RESPIRATORY PACKAGE
- Our respiratory packages provide top quality respiratory equipment to keep your operations and people protected. Our onsite management of these equipment ensures the duration of work is on time and the overall operations is profitable with no down time.
Option 1 – PremAire Cadet Escape 5 minutes
Option 2 – PremAire Cadet Escape 10 minutes
Option 3 – Industrial Airline cart 2-60 Min cylinders
Option 4 – Airline cart 2-300 cu.ft. cylinders
Option 5 – SCBA 30 minutes
Option 6 – SCBA 60 minutes
Option 7 – Air Purifying Respirator (APR)
*All equipment is inspected and tested after each use and is made ready for next issue
Inspection Testing of Emergency Lighting / Exit Lighting
- Our compressor provides high pressure Grade D breathing air for quick refilling of breathing air cylinders. Our mobile compressor offers the solution to be towed anywhere on the plant for quick response to continuous operations being conducted.Mobile Compressor – Bauer Mobile Air Compressor, certified Grade D Quality air for supplied breathing air system* Reduces time experienced by having to fill the cylinders off-site* Reduces the need for having large quantities of stand by cylinders of breathing air*Compressor is tested for air quality on a quarterly bases as required by NFPA 1989. Cylinders are filled to Grade D specifications as outlined by NFPA 1989 Standard on Breathing Air Quality for Emergency Services Respiratory Protection.
About
IRP’s Rental services provide the industry’s best safety equipment that your job demands for affordable daily, weekly, and monthly rates and long-term projects. Our rentals will save you the initial capital investment, eliminate the cost of ownership, and the storage cost when not in use.
The safety equipment on the rental fleet are portable gas detectors and respiratory protection and coming soon fall arrest systems. All equipment can be prepared and delivered within a 24-hour period for those unplanned emergency work.
PORTABLE GAS DETECTOR
Our gas detection instruments carry the standard four (4) gases LEL, O2, CO and H2S. We have three types of instruments on the rental fleet which can vary depending on the nature of your operation. Pumped instruments for safety checks, diffusion instruments for personal monitoring, and area monitors for continuous operations.
Option 1 – Four (4) Gas Diffusion Instrument
Altair 4X / 4XR GID, LEL, O2, H2S, CO, North American Power Supply, Glow in the Dark Case CO, LEL (0-100% Pentane), O2 (0-30% 4X ONLY), Duo Tox (CO 0-2000 ppm, H2S 0-200 ppm) CSA/ETL approval label. MSA P/N A-ALT4:-X-L-2-A-N-C-0-0-G-0
Option 2 – Four (4) Gas Pump Instrument
Altair 5X, Configured, Color Display, Sensor #1: LEL 0-100% Pentane, Sensor #2: Oxygen 0-30% m Sensor #3 (Exotic): None, Sensor #4: CO/H2S: 0-1999ppm & 0-200ppm, Advanced Sensor: None, Packaging: Red Economy, Approval Label: CSA/UL, Sampling Probe Kit Non React. MSA P/N A-ALTX5X-B-L-K-0-1-0-R-C-0-1-0
Option 3 – Four (4) Gas Area Monitor
Altair io360, Methane 0-100% LEL, 5.0 VOL%, O2 0-30%, 0-1999 PPM CO, 0-200 PPM H2S, 915 MHz (NORTH AMERICA), UL (US) Listed. MSA P/N A-ALTIO360L1ANNB01
Option 4 – Calibration Test System
Galaxy Automated Test system, c/w test stand and cylinder holder, Automated record keeping and calibration system for MSA portable gas detection instruments. System is standalone, requiring no computer, controller, or network interface. All gas tubing and communication paths are pre-connected.
BREATHING APPARATUS
Option 1 – PremAire Cadet Escape 5 minutes
PremAire Cadet, MSA 5-min Carbon Cylinder, Ultra Elite Hycar Med. Ultra Elite Medium Nose Cup, Shoulder Pad, Nylon Carrying Bag, Firehawk PTC Solid Regulator, Rubber Head Harness, QD Foster SST, AL Respirator, c/w Hardcase.
Option 2 – PremAire Cadet Escape 10 minutes
PremAire Cadet, MSA 10-min Carbon Cylinder, Ultra Elite Hycar Med. Ultra Elite Medium Nose Cup, Shoulder Pad, Nylon Carrying Bag, Firehawk PTC Solid Regulator, Rubber Head Harness, QD Foster SST, AL Respirator, c/w Hardcase.
Option 3 – Industrial Airline cart 2-60 Min cylinders
Cart, Wheeled Portable (RENTAL), Industrial, AL Respirator, Equipped with Foster Steel Quick Disconnect fiitings, Two Sets double-cylinder straps, Airline-hose rack and adjustable pull handle Pressure regulator, Low-pressure cylinder alarm whistle, 125psig relief valve c/w Cylinder, MSA Stealth Custom 4500 MMR 60min. Green H-60 SCBA.
Option 4 – Airline cart 2-300 cu.ft. cylinders
Cart, Breathing Air (RENTAL), 4 Port Manifold, 2 x 300, 2200 psig Cylinder, SS Flex Air-Line, SS CGA Nipple & Nut, 346, Audilarm, Regulator, 300 psi and 3000 psi Gauge, Galvanized material, painted for industrial environments, c/w cover, (kit) IRP.
Option 5 – Self-contained Breathing Apparatus (SCBA) 30 minutes
MMR, (RENTAL), Ulite HUD Fire Hawk STC Grey 2216psig, 30min.Stealth Cylinder, Air Double Pull Carrier, UElite Silicone Facepiece (HUD) Med. w/Lumbar Pad, Rubber Head Harness w/ Neck strap, Quick-Connect Slide, ICM TX w/o Heat Sensor, LCD Screen, Audible & Visual alarm, built in transmitter (w/ Hard Carrying Case)
Option 6 – Self-contained Breathing Apparatus (SCBA) 60 minutes
MMR, (RENTAL), Custom 4500 K-CMD14B00C12AD1 60 Min. Stealth Cylinder, UElite Facepiece (HUD) Med. Hycar w/Lumbar Pad, Speed-On Head Harness w/o Neck strap, Fire Hawk Regulator Quick Connect Slide, ICM TX w/o Heat Sensor (w/Hard Carrying Case)
Option 7 – Air-Purifying Respirator (APR)
MSA Advantage Respirator c/w GME Cartridge and TAR Logo Pouch
Option 8 – Airline Hose
Hose, (RENTAL) MSA 50ft x 3/8″ Air-Line. Neoprene Black Univ. (c/w Fittings) Breathing Apparatus c/w Male Plug, Female Socket & Male Adapter
Option 9 – 30-minute Spare cylinder
Cylinder, (RENTAL) 2216psig, Stealth L-30min, MMR, Grey.
Option 9 – 60-minute Spare cylinder
Cylinder, (RENTAL) 4500psig, 60min Stealth H-30, Custom 4500 MMR SCBA
Option 10 – Airline 300 cu.ft. Spare cylinder low pressure.
Cylinder, Air 300 cu.ft. 2400psig., Chrome Yellow, AL Respirator, Breathing Air CGA 346 DOT# 3AA2400.
Option 11 – Airline 300 cu.ft. Spare cylinder high pressure.
Cylinder, Air 300 cu.ft. 4500psig., Chrome Yellow, AL Respirator, Breathing Air CGA 347 DOT# 3AA4500.
*All equipment are inspected, tested, and issued for delivery with certificates
BREATHING AIR COMPRESSOR PACKAGE
- Our compressor provides high pressure Grade D breathing air for quick refilling of breathing air cylinders. Our mobile compressor offers the solution to be towed anywhere on the plant for quick response to continuous operations being conducted.
- Mobile Compressor – Bauer Mobile Air Compressor, certified Grade D Quality air for supplied breathing air system
- Reduces time experienced by having to fill the cylinders off site
- Reduces the need for having large quantities of stand by cylinders of breathing air
- Compressor is tested for air quality on a quarterly basis as required by NFPA 1989.
- Cylinders are filled to Grade D specifications, as outlined by NFPA 1989 Standard on Breathing Air Quality for Emergency Services Respiratory Protection.
FLEXIBLE HOSE ASSEMBLY INTEGRITY MANAGEMENT
- We support your safety at work with our Flexible Hose Assembly (FHA) Integrity Management model. We are aligned with Hydrasun and the ‘Energy Institute Guidelines for Flexible Hose Assemblies’ to effectively manage each stage of the hose integrity management process:
- Design and specification of FHAs for application and environment
- Assembly, certification and tagging of new and replacement FHAs
- Consultation for Installation and Routing
- Baseline inspection surveys and Risk-Based Inspections – inclusive of software and database access
- FHA Spares Management
- Technical FHA Training
- Engineering Support for every FHA need
FLEXIBLE HOSE ASSEMBLY CERTIFICATION
- Our Technical Team is Hydrasun, BFPA and OPITO, trained and certified, to provide In-House Flexible Hose Assembly (FHA) Certification. The process entails:
- Visual inspection
- Hydrotesting to 1.5 times the working pressure and held for a minimum of 3 minutes
Tagging with UV protected paper tags or engraved stainless steel tags with relevant hose and test information - Provision of individual and batch certificates
- Onsite service can be provided where necessary. Equipment mobilization, rental and Technician day rates will apply.
SPECIALIZED COUPLING SERVICE & RE-CERTIFICATION
- Our Technical Team is TODO and KLAW trained and certified, to provide Dry-Break Coupling and Break-Away Coupling Service and Certification. This process involves:
- Visual inspection
- Repair and Service using spare kits
- Hydro testing to 1.5 times the working pressure and held for a minimum of 3 minutes
- Tagging with engraved stainless steel tags with relevant information – optional
- Provision of individual Service Checklists and Certificates
TECHNICAL TRAINING SERVICES
- We share our knowledge and experience to better equip you to operate safely. We work closely with Hydrasun to provide Integrity Management Technical Training for both Flexible Hose Assemblies (FHAs), and Stainless Steel Small Bore Tubing (SBT). Hydrasun’s Learning & Competence Management system is accredited to the OPITO standard.
- Experienced trainers deliver classroom based, practical and competence assessment training, including BFPA & ECITB training courses.
- Customer specific and industry standard courses can be delivered at our Training Campus or on any customer site. Chat with us about your training needs.
